Full Digital Networked DSP Conference Processor
VIS-DCP2000
Technical Parameters
| Power | 110V / 220V AC |
| Static power consumption | 12W |
| Maximum power consumption | 150W |
| Frequency Response | 20Hz ~ 20KHz |
| Noise ratio (S / N) | > 80dB |
| Total harmonic distortion | <0.05% |
| Channel Crosstalk | > 80dB |
| Dimensions (mm) | 483L x 260W x43.6H |
| color | Dark gray |
Features
1. The unique AUDIO-LINK digital ring network technology achieve
full-digital signal transmission and processing
2. One CAT5e cable to transmit up 64 channels audio and other
signals.
3. High-fidelity sound quality by lossless audio transmission
technology, 48K audio sampling rate and 20Hz ~ 20KHz frequency
response
4. "Hand-in-Hand-Loop-Network" connection makes the system always
working perfectly no matter changing discussion unit or having any
malfunctioned units
5. Support AGC(Automatic Gain Control)/AFC(Adaptive Feedback
Cancellation)/ANC(Acoustics Noise Cancellation ) Support sound
output by separated zones, each zone is automatically adjusted
according to the volume of the position of the microphone, achieve
longer distances pickup without whistle.
6. Support echo cancellation, remote two-way real-time call with
another conference controller or another third-party video
conferencing terminal
7. USB recording, advanced noise cancellation technology to realize
clearer recording
8. Support software control from RJ45 and Web configuration
Functions
Compliance with IEC 60914, GBT 15381-94
With VIS-CNB digital power box, it can expand to 5200 discussion units
Support "Hand-in-Hand-Loop-Network" connection and the system
assigned to each unit independently ID to avoid duplicate ID
conflict
Both wired/wireless discussion units can connect to the controller,
fast and easily to adding delegate of meetings
Wireless unit supports up to 8 microphones active simultaneously,
anti-interference ability is stronger than ever, compliance with
IEEE 802.11n standard Wi-Fi both for 2.4GHz and 5GHz
2 channel audio input, XLR or RCA type, for local input or remote
video-conferencing input
MAX 8 channel audio output, XLR, RCA or Phoenix type, to connect
language translation system or output to different zones
TCP/IP connection between controller and PC
RS232 or RS485 to send the PELCO/VISCA protocol to realize camera
auto-tracking function.
Hot-swap for any system unit, and the controller has auto-recovery
function
Wide range of voltage from 110V~220VAC
Without using PC software, our conference controller still owns
following settings:
Limit on the number of speaking persons: By Setting the number of
active units at the same time(Number is 1/2/4/6/ units)
Discussion modes:
"OPEN" Free for all, limited by the active units setting by controller,"OVERRIDE" First in First out,"FREE" Turn on the MIC freely up the max. quantity, "APPLY" To apply then to speak
Voting function: Approve/Abstain/Object
Chairman unit has priority to close all other units or mute them
temporarily
Chairman unit can answer the application for speaking from delegate
Simultaneous language interpretation
With PC software to add more ways of voting:
Approve/Object
Approve/Abstain/Object
Level:1/2/3/4/5
Ranking:--/-/0/+/++
