CLEACON Full Digital Networked DSP Conference System
Vissonic Conference Microphone Cat5 Wired Digital Discussion
Delegate Unit
Functions
Compliance with IEC 60914, GBT 15381-94
The unique AUDIO-LINK digital ring network technology achieve
full-digital signal transmission and processing, completely avoid
the RF interference from cell phone or similar devices.
One CAT5e cable to transmit 64 channel audio and other signals
High fidelity sound by zero loss audio transmit technology, 48K
audio sampling frequency, 20Hz~20KHz response frequency
"Hand-in-Hand-Loop-Network" connection makes the system always
working perfectly no matter changing discussion unit or having any
malfunctioned units
This system assigned to each unit independently ID to avoid
duplicate ID conflict
Support AGC(Automatic Gain Control)/AFC(Adaptive Feedback
Cancellation)/ANC(Active Noise Control )/Mix (Auto-Mix) technology
Build-in functions for intercom
Hot-swap for any system unit, and the controller has auto-recovery
function
Precise directional microphone head with anti-wind microphone foam
cover, with two-color LED indicator
Button for MIC ON/OFF, Priority & Apply Answer button for chairman
unit
Built-in high fidelity speakers, it automatically mutes to prevent
howling when press MIC ON
Head-set interface in both sides with volume adjust
Without using PC software, our conference controller still owns
following settings:
Limit on the number of speaking persons: By Setting the number of
active units at the same time(Number is 1/2/4/6/ units)
Discussion modes:
"OPEN" Free for all, limited by the active units setting by controller,
"OVERRIDE" First in First out,"FREE" Turn on the MIC freely up the max. quantity, "APPLY" To apply then to speak
Work with our HD camera and video matrix switcher, it applies
camera auto tracking function
The unit showing real time on the screen, and count-down timer for
speaking person.
Technical Parameters
Button: Touchable interface, no physical buttons
Sound Pickup: heart type capacitance
Display: OLED display 128 × 32
Sensitivity: -46 dBV / Pa
Maximum power consumption: 2.0W
Directivity: 0 ° / 180 °> 20 dB (1 kHz)
Headphone load: 16Ω
headphone volume: 10mW
Headphone jack: 3.5mm stereo
Input impedance: 2kΩ
SNR: 70dB
